Deep Ridge Plow

Deep Ridge Plow
Product Introduction:
The 3QL series is compatible with the three-point suspension of tractors and can be paired with corresponding horsepower tractors to complete tasks.

Made of square steel tube 65 manganese steel material, the core working components have undergone heat treatment processing, with strong hardness and wear resistance.

The angle can be adjusted, mostly between 30° and 45° When working in heavy soil, the angle can be increased to 25-30 ° to avoid soil adhesion to the disc and soil compaction.

Send Inquiry
Description
Technical Parameters

The 3QL Deep ridge plow series is compatible with the three-point suspension of tractors and can be paired with corresponding horsepower tractors to complete tasks. Different from ordinary ridge plows, it is highly likely to integrate a composite structure of deep loosening shovel and ridge disc.

During operation, it can first break the soil plow bottom layer through deep loosening components (conventional deep loosening depth can meet the agricultural standard of 25-30 centimeters), and then complete ridge formation through 65 manganese steel material ridge disc, without the need for separate operations, greatly improving cultivation efficiency.

 

The 3QL Deep ridge plow

 

The angle, spacing, and height of the ridge can be adjusted, with the spacing typically ranging from 700-900 millimeters and the height from 150-250 millimeters, to meet the deep loosening and ridge requirements of different crops.


The ridge plow structure is sturdy and suitable for complex soils: the frame is made of square steel pipes, and the core working components are heat-treated, with strong hardness and wear resistance.

 

When facing compacted land or farmland with residues, deep ridge plow can not only stably complete deep loosening operations to avoid component deformation, but also clean up crop residues during the deep loosening process, creating good conditions for ridge formation and reducing subsequent cleaning procedures.

 

 

The 3QL Deep ridge plow


Key points for operation of deep loosening ridge plow
Commissioning before operation: first determine the depth of subsoiling and ridge type parameters according to crop demand. For example, when planting potatoes, the depth of subsoiling can be adjusted to about 25 cm, and the ridge height can be set to 200-250 mm;

 

Adjust the tractor pull rod during installation to ensure that the frame is level, and check the fastening of the deep loosening shovel and ridge plate. Parts with severe wear should be replaced in a timely manner.


Keep the tractor running at a constant speed in a straight line during homework, avoid frequent stops or turns midway, and prevent problems such as skewed ridges and uneven depth of looseness. If encountering obstacles such as rocks during homework, the machine should be stopped and cleaned before continuing to avoid damaging the deep loosening shovel and ridge plate.

 

In addition, when working in areas with severe spring drought, it is advisable to loosen the soil slightly to prevent soil moisture loss from affecting subsequent crop emergence.
 

After the job is completed, promptly clean the soil and debris on the equipment, with a focus on cleaning the gaps and debris between the deep loosening shovel and the ridge plate;

 

Add lithium based grease to lubrication points such as bearings and suspension joints, and polish or replace worn plow blades or shovel tips; When stored for a long time, deep ridge plow is necessary to apply anti rust oil and place it in a dry shed to avoid component corrosion.

 

The 3QL Deep ridge plow


Ridge plow adapted to cultivation scenarios

Suitable for the ridge cultivation mode in northern production areas such as Northeast China and Inner Mongolia, for example, in the soybean "ridge three" cultivation technology, it can be used for deep loosening and ridge formation of the ridge body, laying the foundation for subsequent layered fertilization and precision sowing; It is also suitable for vegetable planting bases in southern hills or plains. For crops such as chili and eggplant that require high ridge cultivation, deep loosening and ridge raising can improve soil permeability and reduce the risk of waterlogging and root rot.


The 3QL Deep ridge plow can be used for deep loosening and ridge formation during autumn soil preparation (without compaction to allow the soil to naturally solidify and avoid compaction), and can also be used in conjunction with spring sowing for deep loosening and ridge formation at the bottom of the ridge, flexibly adapting to the farming rhythm of different seasons. It is one of the key agricultural machinery for improving the quality of ridge cultivation in large-scale planting.

 

Hot Tags: deep ridge plow, China deep ridge plow manufacturers, factory

Send Inquiry
Multifunctional agricultural machinery
Determine your most suitable tractor model configuration
LEADRAY provides farmers with efficient field operation solutions
contact us