What Are The Common Disc Harrow Sizes Available For Small Agricultural Tractors?

Dec 06, 2025

Leave a message

Common sizes of disc harrows for small agricultural tractors are mainly defined by working width, disc diameter, and working depth.

 

These dimensions are closely matched to the horsepower of small tractors (typically 12 - 50 hp) and are tailored to small - scale scenarios such as vegetable plots, greenhouses, and small orchards. 

 

are tailored to small - scale scenarios such as vegetable plots, greenhouses, and small orchards. 

 

Working width

This is the core size parameter, and its value increases with the matching tractor horsepower. It is the most intuitive indicator for selecting a disc harrow.

 

Matching Tractor Horsepower (hp) Common Working Width Number of Disc Blades Application Scenarios
12 - 15 1.1 - 1.25m 12 - 16 Narrow spaces like small vegetable plots and greenhouses, suitable for fine weeding and soil preparation
15 - 25 1.3 - 1.6m 14 - 20 General small - scale farmland. It can balance efficiency and flexibility, meeting the daily soil preparation needs of small family farms
25 - 40 1.5 - 2.0m 16 - 24 Medium - sized small plots and orchard interrows. It can improve operation efficiency while avoiding damage to crop roots
40 - 50 1.7 - 2.3m 18 - 28 Large - area small - scale contiguous farmland. It is suitable for pre - sowing large - scale soil preparation and post - harvest stubble removal

 

Disc diameter

 

 

Disc diameter

The disc diameter determines the soil penetration ability of the disc harrow. For small tractors, the disc diameter is relatively unified to match their limited power output. Most light - duty and medium - light disc harrows matched with small tractors have a disc diameter of 460mm.

 

There are also some small - sized disc harrows for ultra - small tractors (below 15hp) with a smaller disc diameter of about 350 - 400mm, which are more flexible for shallow weeding in greenhouses.

 

In addition, some imported small - sized disc harrows for nurseries and small hobby farms have a disc diameter of 51cm or 56cm, which can enhance the wear resistance and soil - cutting effect.

 

Working depth

 

The working depth of disc harrows for small tractors is relatively concentrated, mostly ranging from 10 - 14cm. This depth can cut weed roots and crush surface clods without over - turning the subsoil, which is in line with the agronomic requirements of crops such as vegetables, strawberries, and wheat for shallow soil preparation.

 

The working depth of disc harrows for small tractors is relatively concentrated, mostly ranging from 10 - 14cm.

 

For special operations like light stubble removal, the depth can be adjusted to 5 - 8cm through the tractor's hydraulic system; for soil with dense weeds, it can be adjusted to the maximum 14cm to ensure the weeding and soil - loosening effect.

 

In addition, some international small - sized disc harrow models also have inch - based size specifications.

 

For example, the DH10 series has working widths of 48 inches (about 1.22m) and 60 inches (about 1.52m), which are compatible with small overseas tractors and are also applicable to domestic small - scale planting scenarios after adaptation.

Send Inquiry
Multifunctional agricultural machinery
Determine your most suitable tractor model configuration
LEADRAY provides farmers with efficient field operation solutions
contact us