Belonging to the main three-point suspension land leveling equipment of tractors, the power is connected to the main gearbox in the center of the body through the rear output shaft of the tractor, which outputs to both sides to drive the blade shaft to rotate the cultivated land. Different from the side chain driven rotary tiller, it has stronger structural strength, durability, and transmission efficiency. It is versatile in multiple scenarios such as dry land, paddy fields, stubble removal, harrowing, and ridge formation, and is a standard model for large-scale land leveling in domestic and foreign farms.
The middle drive rotary tiller body divides into two halves, left and right, which respectively drive the left and right blade rollers to rotate.
The knife shaft is a split half shaft, separated by a gearbox in the middle. A small plow shovel will be installed below the box to compensate for missed plowing.
The advantage is symmetrical and balanced force distribution: the left and right power are evenly distributed, the whole machine does not deviate, the plowing depth is consistent, and the tractor load is even;
Low transmission loss and durability: the power is divided into left and right directions, the gear load is dispersed, and heavy loads, hard clay, and straw in multiple plots are not easy to toothed;
Simple structure, cheap maintenance: only one main gearbox, universal accessories, low price;
The center of gravity is centered, and the stability of turning and climbing on the ground is strong. It is standard for small and medium horsepower tractors.
There is only a small bridge gearbox on the top of the side drive rotary tiller body, and the power is transmitted from the side gearbox on one side of the machine to a complete through type blade shaft without any intermediate partition, with blades throughout the entire shaft.
The advantages are no missed cultivation and ultra flat surface: the entire shaft is connected, there is no box cover in the middle, the broken soil is uniform, and the qualified seed bed is formed in one time;
The advantage of paddy fields is great: mud will not accumulate in the middle, making it less likely to entangle grass or block mud;
Capable of large-scale field high-speed operations with a width of over 2 meters;
Mainstream styles of agricultural machinery exported from Europe and America, suitable for compound tillage (rotary tillage+soil crushing roller).
Q1：What is the difference between middle drive and side chain drive rotary tiller?
What is the difference between the mid-range gear model and the side chain rotary tiller?
A: Side chain clause: Relying on chain transmission, it is prone to elongation, chain breakage, and tooth jumping under long-term heavy loads, requiring frequent maintenance. It is suitable for low horsepower, lightweight, and shallow plowing;
1GQN mid mounted gear model: Gear rigid transmission, stronger bearing capacity, stable and reliable for deep plowing, wasteland, and straw fields, lower failure rate, suitable for long-term large-scale operations.
Q2：Which HP tractor does each model match?
What horsepower tractor models are suitable for?
A: 125cm / 18-30HP; 150/160cm / 25-45HP; 180cm / 40-60HP; 200cm → 60-80HP; 230cm / 80-100HP; can provide precise matching of tractor models.
Q3：Can it work in muddy paddy field with rice straw?
A: Absolutely possible. Standard anti entanglement grass end structure, making it difficult for straw to wrap around the blade shaft; The fully sealed waterproof bearing model can be upgraded for paddy field environments to prevent mud and water from entering the bearing and causing corrosion and damage.
Q4：Are blades replaceable? How to purchase spare parts?
A: Each rotary tiller blade is fastened with independent bolts, and can be directly disassembled and replaced with a single blade; The factory reserves a complete set of vulnerable parts such as blades, gears, bearings, and oil seals all year round. Spare parts can be included with orders, and accessories can be sent by express delivery/LCL in the future.
Q5：Can I add ridger or seeder attachment?
A: Standard installation holes are reserved for all models, and the original factory is equipped with a ridge plow, fertilization and sowing integrated machine, and soil compaction roller. When placing an order, a complete set can be directly selected and shipped.
Q6：What is the warranty period?
A: The cast steel gearbox and the welded frame of the entire machine are covered by a 24 month warranty for non-human damage; Rotary tiller blades, oil seals, and bearings are normal farming consumables with a 12-month factory warranty; Free replacement parts for quality issues and lifelong remote technical guidance.
Q7：Can I customize the working width and machine color?
A: The homework width can be customized within the range of 1.2m~2.5m; Regular red, blue, and green in stock, with a minimum of 1 unit available for customized enterprise exclusive paint colors.
,
