140HP 4WD Heavy Duty Wheel Farm Tractor Full Technical Specification
Standard Model: YTO LX1404 / NLX1404 (4×4 Heavy-Duty Agricultural Tractor) Core Positioning: Large horsepower four-wheel drive tractor for deep ploughing, heavy rotary tillage, stubble breaking, land reclamation, large farm operation and long-distance heavy trailer transportation.
Engine System (YTO Original 6-Cylinder Diesel Engine)
| Item | Technical Parameter |
|---|---|
| Engine Model | LR6A3LU22 / LR6M5-23 Inline 6-Cylinder Water-Cooled Turbo Intercooled Diesel Engine. |
| Rated Power | 140HP / 103kW |
| Rated Speed | 2200 r/min |
| Fuel Injection | Bosch High Pressure Common Rail Injection |
| Emission Versions | Euro II (Basic); Euro III; Euro IV (DOC+DPF+SCR Urea Exhaust Treatment). |
| Fuel Type | 0# Diesel Fuel |
| Fuel Tank Capacity | 120L Large Capacity Side Fuel Tank |
| Fuel Consumption | 6.5~9 L/h under full load working condition |
| Starting Mode | 12V Electric Start |
Transmission & Drive System
Drive Mode: 4×4 Permanent Four-Wheel Drive (Switchable 2WD/4WD)
Standard Gearbox: 12 Forward + 4 Reverse (12F+4R) Synchronized Shuttle Gearbox.
Optional Upgrade: 24F+8R Creep Gearbox (for engineering & ultra-low speed heavy operation).
Clutch: 12-inch LUK Double Acting Clutch.
Differential Lock: Rear Axle Full Lock (Standard Configuration, anti-slip on muddy & sloped land).
Steering: Independent Pump Full Hydraulic Power Steering.
Minimum Turning Radius: ≤7.0 mYTO.
Braking System: Oil-Immersed Wet Multi-Disc Service Brake; Hand Parking Brake.
Overall Dimension & Weight
| Parameter | Standard Data |
|---|---|
| Overall Dimension (L×W×H) | 5050 × 2380 × 3100 mmYTO |
| Wheelbase | 2688.5 mmYTO |
| Minimum Ground Clearance | 470 mmYTO |
| Front Wheel Tread (Adjustable) | 1714~2152 mm |
| Rear Wheel Tread (Adjustable) | 1576~2276 mm |
| Minimum Operating Weight | 5280 kg中国一拖集... |
| Max Counterweight (Front / Rear) | 400 kg / 300 kg中国一拖集... |
| Maximum Traction Force | ≥48 kN |
Standard Tire Configuration
Front Tyre: 14.9-26
Rear Tyre: 18.4-38
Optional Tyres: Paddy Anti-Sink Tyre, Narrow Orchard Tyre, Dual Rear Tyre for Overload Operation
Hydraulic Lifting & PTO Power Output
Rear Suspension: Category II Heavy-Duty 3-Point Hitch, Force & Position Dual Control + Forced Down Pressure Function.
Max Lifting Force (610mm from hitch point): 4700 kg / 46 kN
PTO Shaft Dual Speed: 540 / 1000 r/min (540/720rpm optional).
Standard Hydraulic Output: 2 Groups Multi-way Hydraulic Valve; Optional 3/4 Groups Hydraulic Circuits..
Main Hydraulic Pump Flow: 60 L/min.
Standard & Optional Factory Configuration
Basic Standard Configuration
Roll-molded Integrated Cab Frame, Shock Absorbing Suspension Seat.
Digital Combination Instrument with Working Hour Meter.
Front & Rear LED Working Lights, Rear Traction Drawbar.
Chassis Oil Radiator (Prevent overheating during long-hour heavy load work).
