1LF series hydraulic flip plow that is compatible with four-wheel tractors. It is suitable for sand soil and early field plowing and flipping operations, and can perform shuttle type bidirectional operations. After plowing, the ground surface is flat and has the characteristics of less idle travel and high operating efficiency.
The Seires of 1LF reversal plough can be mounted to 30-120HP tractors with 2ways of revrse mechanical ,and hydraulic.hydraulic reversed plough can be adjust for the different with and different tractors,the hydraulid system is automatically and the operation is smooth without any troubles.
Hydraulic flip plough quipment
The flip plow is an agricultural tillage machine used in conjunction with a tractor.
Advantages of flip plow
With two-way flip function
Improve efficiency
Improve efficiency: It has a two-way flipping function. When plowing the land, there is no need to adjust the direction frequently like traditional plows, which reduces the tractor's idle time and fuel consumption, improves the efficiency of farming, and saves time and fuel.
The surface is flat after plowing
The surface is flat after plowing: When plowing back and forth, the soil is always turned to one side, and there is no wall ditch in the ground. The surface is flat after plowing, which is conducive to subsequent sowing, irrigation and other operations.
Improve soil structure
Improve soil structure: It can break the bottom layer of the plow, restore the structure of the soil plowing layer, increase the air permeability and water permeability of the soil, improve the soil's ability to store water and retain moisture, and is conducive to the growth and development of crop roots.
Reduce weeds and pests and diseases: Vegetation and straw on the surface of the field can be cut and buried deep, making it difficult for weeds to grow. At the same time, it can also eliminate the eggs and larvae of some pests and diseases, reducing the occurrence of pests and diseases.
The ground wheel mechanism adjusts the tillage depth through a screw to meet different tillage requirements
Working principle of the flip plow
Working principle of the flip plow: The flip plow is controlled by a double distributor to lift and flip the plow.
When the tractor drives the flip plow forward, the piston rod in the flip oil cylinder is controlled to extend and retract, driving the center shaft on the plow frame to rotate in the center shaft sleeve, thereby realizing the vertical flipping of the forward and reverse plow bodies on the plow frame, so that the soil is always flipped to one side, and no wall grooves are left in the ground during round-trip plowing.
At the same time, the ground wheel mechanism adjusts the plowing depth through the screw to meet different plowing requirements.
Lightweight design of hydraulic flip plow
This product used in plain, hills, mountains farms, with compact structure, reasonable design, flexible to flip, backward and reliable, broken soil ability, operation speed, good quality of work, high working efficiency, and reduces the slope, the surface of the ground after tillage,especially organic dry region straw ploughing up the work, also the field crop rate more than 90%.
Its characteristics are flexible, stable and not easy to damage.
Through lightweight design and precise angle control, the flip plow can achieve refined tillage on steep slopes, avoiding the problems of easy rollover and low efficiency of traditional plows, and helping to improve land utilization and crop yields in mountain terraces.
| 1LF Series of Hydraulic flip plough | ||||
| No. | Model | Weight kg | Tractor power hp | Space of blade mm |
| 1 | 1LF435 | 850 | 100-140 | 850-900 |
| 2 | 1LF535 | 1050 | 130-180 | 850-900 |
| 3 | 1LF435Q | 1150 | 110-150 | 900-950 |
| 4 | 1LF535Q | 1400 | 140-180 | 900-950 |
| 5 | 1LF440 | 1250 | 120-160 | 900-1000 |
| 6 | 1LF445 | 1420 | 140-180 | 1000-1100 |
| 7 | 1LF450 | 1650 | 180-220 | 1100-1200 |
| 8 | 1LF550 | 1900 | 210-280 | 1100-1200 |
| 9 | 1LF350 | 1200 | 150-180 | 1100-1200 |
| 10 | 1LF360 | 1240 | 160-180 | 1100-1200 |
| 11 | 1LF460 | 1700 | 200-240 | 1100-1200 |
| 12 | 1LF427 | 670 | 80-100 | 600-650 |
| 13 | 1LF527 | 760 | 90-120 | 600-650 |
| 14 | 1LF627 | 840 | 110-160 | 600-650 |
| 15 | 1LF430 | 695 | 90-110 | 650-700 |
| 16 | 1LF530 | 790 | 100-140 | 650-700 |
| 17 | 1LF 630 | 880 | 120-160 | 650-700 |
| 18 | 1LF230 | 420 | 60-70 | 700-800 |
| 19 | 1LF225 | 248 | 40-50 | 550 |
| 20 | 1LF227 | 248 | 40-50 | 600 |
| 21 | 1LF325 | 310 | 40-60 | 500 |
| 22 | 1LF327 | 310 | 40-60 | 600 |
| 23 | 1LF425 | 560 | 60-90 | 550 |
| 24 | 1LF427 | 560 | 60-90 | 600 |
| 25 | 1LF527 | 660 | 80-110 | 600 |
| 26 | 1LF627 | 740 | 100-130 | 600 |
| 27 | 1LF 727 | 830 | 120-160 | 600 |
1LF-325 Folding Plow: Overall dimensions are 1800×1000×1030mm, structural weight is 180kg, plow body width is 25cm, total working width is 75cm, tillage depth is 22cm, plow body number is 3×2, tillage speed is greater than 5km/h, and supporting power is 29.4-37kW.
L-1LYFT-360 Folding Plow: Overall dimensions are 4000×2200×1950mm, curb weight is 1300Kg, plow body spacing is 120cm, single tillage width is 40cm/46cm/53cm/60cm optional, working tillage width is 120cm/138cm/159cm/180cm, adjustable tillage depth is 20-40cm, and supporting power is 140-180 horsepower.
Diverse operation modes: Some reversible plows have a modular design, and the plow body components can be quickly replaced, which is suitable for various operation modes such as deep plowing, shallow plowing, and ridging to meet the planting needs of different crops.
Strong adaptability: Some advanced reversible plows are equipped with high-precision sensors, which can monitor the soil hardness and terrain slope in real time, automatically adjust the plow body's penetration depth and reversal angle, and can operate well in different terrains such as mountains, plains, and hills, as well as different soil conditions such as loam, light clay, and sandy loam.
Hot Tags: hydraulic flip plough, China hydraulic flip plough manufacturers, factory
